Want to Pass 200-125 Exam In Next HOURS? Get it now →
November 18, 2018

Super ways to ccna 200 125 dumps

Your success in Cisco ccna 200 125 pdf is our sole target and we develop all our ccna 200 125 book braindumps in a way that facilitates the attainment of this target. Not only is our 125 200 study material the best you can find, it is also the most detailed and the most updated. 200 125 ccna pdf Practice Exams for Cisco CCNA Routing and Switching ccna 200 125 pdf are written to the highest standards of technical accuracy.

P.S. Exact 200-125 preparation are available on Google Drive, GET MORE: https://drive.google.com/open?id=1N7mstYjhTswrvFd1eA3ZZFuxiKuT_fqh

New Cisco 200-125 Exam Dumps Collection (Question 6 - Question 15)

New Questions 6

CORRECT TEXTThe following have already been configured on the router:

u2711 The basic router configuration

u2711 The appropriate interfaces have been configured for NAT inside and NAT outside.

u2711 The appropriate static routes have also been configured (since the company will be a stub network, no routing protocol will be required)

u2711 All passwords have been temporarily set to u201cciscou201d.

The task is to complete the NAT configuration using all IP addresses assigned by the ISP to provide Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host provided for testing.

Configuration information: router name u2013 Weaver

inside global addresses u2013 - inside local addresses - u2013

number of inside hosts u2013 14

A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of u2013


The company has 14 hosts that need to access the internet simultaneously but we just have 6 public IP addresses from to Therefore we have to use NAT overload (or PAT)

Double click on the Weaver router to open it

Router>enable Router#configure terminal

First you should change the router's name to Weaver

Router(config)#hostname Weaver

Create a NAT pool of global addresses to be allocated with their netmask. Weaver(config)#ip nat pool mypool netmask

Create a standard access control list that permits the addresses that are to betranslated.

Weaver(config)#access-list 1 permit

Establish dynamic source translation, specifying the access list that was definedin the prior step.

Weaver(config)#ip nat inside source list 1 pool mypool overload

This command translates all source addresses that pass access list 1, which means a source address from to, into an address from the pool

named mypool (the pool contains addresses from198.18.184.105 to Overloadkeyword allows to map multiple IP addresses to a single registered IPaddress (many-to-one) by using different ports.

The question said that appropriate interfaces have been configured for NAT inside and NAT outside statements.

This is how to configure the NAT inside and NAT outside, just for yourunderstanding:

Weaver(config)#interface fa0/0 Weaver(config-if)#ip nat inside Weaver(config-if)#exit Weaver(config)#interface s0/0 Weaver(config-if)#ip nat outside Weaver(config-if)#end

Finally, we should save all your work with the following command:

Weaver#copy running-config startup-config

Check your configuration by going to "Host for testing" and type:

C :\\>ping

The ping should work well and you will be replied from

New Questions 7

Refer to the exhibit.

All devices attached to the network are shown. Which number of collision domains are present in this network?

A. 9

B. 3

C. 6

D. 2

E. 15

Answer: E

New Questions 8

What can be done to secure the virtual terminal interfaces on a router? (Choose two.)

A. Administratively shut down the interface.

B. Physically secure the interface.

C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.

D. Configure a virtual terminal password and login process.

E. Enter an access list and apply it to the virtual terminal interfaces using the access-class


Answer: D,E


It is a waste to administratively shut down the interface. Moreover, someone can still access the virtual terminal interfaces via other interfaces ->

We cannot physically secure a virtual interface because it is u201cvirtualu201d ->.

To apply an access list to a virtual terminal interface we must use the u201caccess-classu201d command. The u201caccess-groupu201d command is only used to apply an access list to a physical interface -> C is not correct.

The most simple way to secure the virtual terminal interface is to configure a username & password to prevent unauthorized login.

New Questions 9

Refer to the exhibit.

Which address range efficiently summarizes the routing table of the addresses for router Main?





Answer: B


The network is the best option as it includes all networks from u2013 and does it more efficiently than the /16 and /18 subnets. The /21 subnet will not include all the other subnets in this one single summarized address.

New Questions 10

What is known as "one-to-nearest" addressing in IPv6?

A. global unicast

B. anycast

C. multicast

D. unspecified address

Answer: B


IPv6 Anycast addresses are used for one-to-nearest communication, meaning an Anycast address is used by a device to send data to one specific recipient (interface) that is the closest out of a group of recipients (interfaces).

New Questions 11

What is the first 24 bits in a MAC address called?





Answer: C


An Organizationally Unique Identifier (OUI) is a 24-bit number that uniquely identifies a vendor, manufacturer, or other organization globally or worldwide.

They are used as the first 24 nits of the MAC address to uniquely identify a particular piece of equipment.

New Questions 12

A network engineer wants to allow a temporary entry for a remote user with a specific username and password so that the user can access the entire network over the Internet. Which ACL can be used?

A. standard

B. extended

C. dynamic

D. reflexive

Answer: C


We can use a dynamic access list to authenticate a remote user with a specific username and password. The authentication process is done by the router or a central access server such as a TACACS+ or RADIUS server. The configuration of dynamic ACL can be read here:http://www.cisco.com/en/US/tech/tk583/tk822/technologies_tech_note09186a0080094 524.shtml

New Questions 13

Which option is a valid IPv6 address?

A. 2001:0000:130F::099a::12a

B. 2002:7654:A1AD:61:81AF:CCC1

C. FEC0:ABCD:WXYZ:0067::2A4

D. 2004:1:25A4:886F::1

Answer: D


An IPv6 address is represented as eight groups of four hexadecimal digits, each group representing 16 bits (two octets). The groups are separated by colons (:). An example of an IPv6 address is 2001:0db8:85a3:0000:0000:8a2e:0370:7334. The leading 0u2019s in a group can be collapsed using ::, but this can only be done once in an IP address.

New Questions 14

What are three reasons to collect Netflow data on a company network? (Choose three.)

A. To identify applications causing congestion.

B. To authorize user network access.

C. To report and alert link up / down instances.

D. To diagnose slow network performance, bandwidth hogs, and bandwidth utilization.

E. To detect suboptimal routing in the network.

F. To confirm the appropriate amount of bandwidth that has been allocated to each Class of Service.

Answer: A,D,F


NetFlow facilitates solutions to many common problems encountered by IT professionals.

+ Analyze new applications and their network impact

Identify new application network loads such as VoIP or remote site additions.

+ Reduction in peak WAN traffic

Use NetFlow statistics to measure WAN traffic improvement from application-policy changes; understand who is utilizing the network and the network top talkers.

+ Troubleshooting and understanding network pain points

Diagnose slow network performance, bandwidth hogs and bandwidth utilization quickly with command line interface or reporting tools. -> D is correct.

+ Detection of unauthorized WAN traffic

Avoid costly upgrades by identifying the applications causing congestion. -> A is correct.

+ Security and anomaly detection

NetFlow can be used for anomaly detection and worm diagnosis along with applications such as Cisco CS-Mars.

+ Validation of QoS parameters

Confirm that appropriate bandwidth has been allocated to each Class of Service (CoS) and that no CoS is over- or under-subscribed.-> F is correct.

New Questions 15

What are the benefits of using Netflow? (Choose three.)

A. Network,Application & User Monitoring

B. Network Planning

C. Security Analysis

D. Accounting/Billing

Answer: A,C,D


NetFlow traditionally enables several key customer applications including:

+ Network Monitoring u2013 NetFlow data enables extensive near real time network monitoring capabilities. Flow-based analysis techniques may be utilized to visualize traffic patterns associated with individual routers and switches as well as on a network-wide basis (providing aggregate traffic or application based views) to provide proactive problem detection, efficient troubleshooting, and rapid problem resolution.

+ Application Monitoring and Profiling u2013 NetFlow data enables network managers to gain a detailed, time-based, view of application usage over the network. This information is used to plan, understand new services, and allocate network and application resources (e.g. Web server sizing and VoIP deployment) to responsively meet customer demands.

+ User Monitoring and Profiling u2013 NetFlow data enables network engineers to gain detailed understanding of customer/user utilization of network and application resources. This information may then be utilized to efficiently plan and allocate access, backbone and

application resources as well as to detect and resolve potential security and policy violations.

+ Network Planning u2013 NetFlow can be used to capture data over a long period of time producing the opportunity to track and anticipate network growth and plan upgrades to increase the number of routing devices, ports, or higher- bandwidth interfaces. NetFlow services data optimizes network planning including peering, backbone upgrade planning, and routing policy planning. NetFlow helps to minimize the total cost of network operations while maximizing network performance, capacity, and reliability. NetFlow detects unwanted WAN traffic, validates bandwidth and Quality of Service (QOS) and allows the analysis of new network applications. NetFlow will give you valuable information to reduce the cost of operating your network.

+ Security Analysis u2013 NetFlow identifies and classifies DDOS attacks, viruses and worms in real-time. Changes in network behavior indicate anomalies that are clearly demonstrated in NetFlow data. The data is also a valuable forensic tool to understand and replay the history of security incidents.

+ Accounting/Billing u2013 NetFlow data provides fine-grained metering (e.g. flow data includes details such as IP addresses, packet and byte counts, timestamps, type-of-service and application ports, etc.) for highly flexible and detailed resource utilization accounting. Service providers may utilize the information for billing based on time-of-day, bandwidth usage, application usage, quality of service, etc. Enterprise customers may utilize the information for departmental charge-back or cost allocation for resource utilization.

see more free 200-125 exam dumps

P.S. Easily pass 200-125 Exam with Dumpscollection Exact Dumps & pdf vce, Try Free: http://www.dumpscollection.net/dumps/200-125/ (889 New Questions)