Want to Pass 300-075 Exam In Next HOURS? Get it now →
August 2, 2017

How to win with 300 075 ciptv2

Proper study guides for Up to the immediate present Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300 075 ciptv2 preparation products which designed to deliver the Guaranteed cisco 300 075 questions by making you pass the 300 075 vce test at your first time. Try the free cisco 300 075 demo right now.

Q121. While configuring Call Survivability in Cisco Unified Communications Manager, what step is mandatory to reach remote sites while in SRST mode? 

A. Enable Cisco Remote Site Reachability. 

B. Configure CFUR. 

C. Enable the SRST checkbox in the MGCP gateway. 

D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager. 

E. Enable the Failover Service parameter. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html 


Q122. When you use the Query wizard to configure the trace and log central feature to collect install logs, if you have servers in a cluster in a different time zone, which time is used? 

A. TLC adjusts the time change appropriately. 

B. TLC uses its local time for all systems. 

C. TLC queries for the time zone as part of configuration. 

D. TLC produces an error and must be run remotely. 

Answer:


Q123. Company A has deployed a VCS Control and is attempting to register a third-party endpoint. The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a valid IP address. Which option could be the cause of this registration failure? 

A. Third-party endpoints are not compatible with VCS Control, only with VCS Expressway. 

B. Cisco Unified Communications Manager is required in addition to the VCS Control. 

C. An incorrect SIP domain is configured on the VCS Control for the endpoint. 

D. The VCS Control must be deployed together with VCS Expressway before endpoints can register to either one. 

Answer:


Q124. Refer to the exhibit. 

Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location? 

A. Total of four calls; two incoming and two outgoing. 

B. Total of two calls in either direction. 

C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration. 

D. Total of four calls in either direction. 

E. Two outgoing calls. Incoming calls are unlimited. 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640 


Q125. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

SRST 

SRST-BR2 Config 

BR2 Config 

SRSTPSTNCall 

Which device configuration option will allow an administrator to control bandwidth between calls placed between branches? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Regions 

Answer:

Explanation: 

In Cisco Unified Communications Manager Administration, use the System > Location Info menu path to configure locations. Use locations to implement call admission control in a centralized call-processing system. Call admission control enables you to regulate audio quality and video availability by limiting the amount of bandwidth that is available for audio and video calls over links between the locations 


Q126. Cisco Unified border element is configured to support RSVP-based CAC. When is the RSVP path and reservation message sent and received? 

A. Immediately after the call setup message is received and the reservation message is received after H.245 capabilities negotiation is completed. 

B. The path and reservation messages are sent and received after the H.245 capabilities negotiation is completed. 

C. The path and reservation messages are sent and received immediately after the call setup message is received. 

D. The path is setup once the global command call rsvp-sync is configured. 

Answer:


Q127. Which statement is true when considering a Cisco VoIP environment for regional configuration? 

A. G.711 requires 128K of bandwidth per call. 

B. G.729 requires 24K of bandwidth per call. 

C. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment. 

D. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use G.711 between regions. 

Answer:


Q128. Refer to the exhibit. 

IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.) 

A. Add port 1/0:23 to dial-peer voice 123 pots. 

B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4. 

C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All). 

D. Add the command h323-gateway voip id on interface vlan120. 

E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4. 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html 


Q129. Which statement about Service Advertisement Framework is true? 

A. SAF requires that the EIGRP be configured on all routers, including non-SAF routers. 

B. SAF requires that the EIGRP be configured only on SAF routers. Non-SAF routers act as an IP cloud. 

C. SAF has no dependency on the underlying routing protocol, as long as it is a dynamic routing protocol. Static routes are not supported. 

D. SAF operates on any dynamic or static IP routing configuration. SAF is totally independent of the underlying routing protocol. 

Answer:

Explanation: 

Because Cisco SAF is independent of IP routing and uses underlying Cisco routing technology to distribute service advertisements in a reliable and efficient manner, Cisco SAF will run in networks over any routing protocol they may have in place such as Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Exterior Border Gateway Protocol (EBGP) over an MPLS service, or static routing (Figure 2). 

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps10822/whitepaper_c11-636604.html 


Q130. When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected? 

A. The audio source that is configured at the user device profile is selected. 

B. The audio source that is configured at the home phone of the user is selected. 

C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected. 

D. The audio source that is configured in the IP Voice Media Streaming parameters is selected. 

Answer:

Explanation: 

Incorrect Answer: B, C, D To specify the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06dvprf.html 



see more free 300-075 exam dumps