Want to Pass 4A0-M02 Exam In Next HOURS? Get it now →
January 11, 2018

Finding Rebirth 4A0-M02 questions pool

Your success in Alcatel-Lucent 4A0-M02 is our sole target and we develop all our 4A0-M02 braindumps in a way that facilitates the attainment of this target. Not only is our 4A0-M02 study material the best you can find, it is also the most detailed and the most updated. 4A0-M02 Practice Exams for Alcatel-Lucent 4A0-M02 are written to the highest standards of technical accuracy.

Q71. There is an active GTP path between an Alcatel-Lucent SGW and an Alcatel-Lucent PGW, On the SGW. Which of the following CLI commands is used to check the "Restart Count" value of the PGW? 

A. show mobile-gateway serving ref-point-peers s5 

B. show mobile-gateway serving ref-point-stats s5 

C. show mobile-gateway serving bearer-stats s5 

D. show mobile-gateway serving path-mgmt-stats s5 

E. None of the above answers are correct. 

Answer:


Q72. After a UE attachment procedure, which GTP-C tunnels are established for the UE? 

A. S1-MME GTP-C tunnel, S11 GTP-C tunnel, and S5 GTP-C tunnel. 

B. S11 GTP-C tunnel and Gx GTP-C tunnel. 

C. S11 GTP-C tunnel and S5 GTP-C tunnel. 

D. S5 GTP-C tunnel and Gx GTP-C tunnel. 

E. S11 GTP-C tunnel, S5 GTP-C tunnel, and Gx GTP-C tunnel. 

Answer:


Q73. Based on the information shown in the exhibit, which of the following statements is FALSE? 

A. Gx commands are not being exchanged with the PCRF peer. 

B. EPS bearers can be successfully established to this PGW. 

C. The TCP connection to the PCRF peer is not established. 

D. Watchdog messages are not being exchanged with the PCRF peer. 

E. None of the above statements are false. 

Answer:


Q74. On Alcatel-Lucent 7750 PGW, which of the following CLI commands can be used to debug a given IMSI? 

A. debug mobile-gateway pdn 1 pdn-session imsi 226041000000008 

B. debug mobile-gateway pdn 1 pdn-session-db imsi 226041000000008 

C. debug mobile-gateway pdn 1 pdn-session imsi 226041000000008 apn ipd.alcatel-lucent.com 

D. debug mobile-gateway pdn 1 pdn-session-db imsi 226041000000008 apn ipd.alcatel-lucent.com 

E. Answers A and C are both correct. 

F. Answers B and D are both correct. 

Answer:


Q75. Which of the following statements are FALSE regarding the SDF templates / filters? (Choose two) 

A. One dedicated bearer can have more than one SDF template. 

B. One SDF template can have only one SDF filter for each direction. 

C. One dedicated bearer can have more than one SDF template and multiple SDF filters. 

D. One dedicated bearer can have only one SDF template. 

E. One SDF template can have multiple SDF filters for each direction. 

Answer: B,D 


Q76. Which network entities assign TEIDs to the indirect data tunnel used during an S1-based handover with no SGW relocation? 

A. The source eNodeB and the SGW. 

B. The source eNodeB, the SGW, and the target eNodeB. 

C. The SGW and the target eNodeB. 

D. The source eNodeB and the target eNodeB. 

Answer:


Q77. On the Alcatel-Lucent 7750 PGW, which of the following is the CLI command to check the statistics of the "Create Session Request" / "Create Session Response" messages? 

A. Show mobile-gateway pdn ref-point-peers gx 

B. Show mobile-gateway pdn ref-point-peers s5 

C. Show mobile-gateway pdn ref-point-stats ga 

D. Show mobile-gateway pdn ref-point-stats s5 

E. None of the above answers are correct. 

Answer:


Q78. A HE (HTTP client) is communicating with an HTTP server over The EPC core Based on the information shown in the exhibit, what is the maximum HTTP traffic rate that the UE may have in the DL direction? 

A. 10000 kbps 

B. 15000 kbps 

C. 20000 kbps 

D. 30000 kbps 

E. 55000 kbps 

F. None of the above answers are correct. 

Answer:


Q79. What is the purpose of indirect data tunnels established for a particular UE? 

A. The indirect data tunnels are used during handovers to forward downlink data from the target eNodeB to the source eNodeB. 

B. The indirect data tunnels are used during handovers to forward uplink data from the target eNodeB to the source eNodeB. 

C. The indirect data tunnels are used during handovers to forward downlink data from the source eNodeB to the target eNodeB. 

D. The indirect data tunnels are used during handovers to forward uplink data from the source eNodeB to the target eNodeB. 

Answer:


Q80. How many S11 GTP-C tunnels are established for a UE having: 

-

One default bearer to APN1, and 

-One dedicated bearer to APN1, and 

-One default bearer to APN2, and 

-Two dedicated bearers to APN2? 

A. One 

B. Two 

C. Three 

D. Four 

E. Five 

Answer:



see more free 4A0-M02 exam dumps