Today Big Q: braindumps 70 410?
It is impossible to pass Microsoft 70 410 dumps pdf exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Microsoft 70 410 exam dumps practice questions. You will get a surprising result by our Renovate Installing and Configuring Windows Server 2012 practice guides.
P.S. 100% Guarantee 70-410 cram are available on Google Drive, GET MORE: https://drive.google.com/open?id=1l5e34W-NoOIZWc2w8rOUEhrHQBLmfQEX
New Microsoft 70-410 Exam Dumps Collection (Question 6 - Question 15)
New Questions 6
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1. Which two commands should you run from Windows PowerShell? (Each correct answer
presents part of the solution. Choose two.)
A. Get-VM u201cVM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM u201cVM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM u201cVM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM u201cVM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM u201cVM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM u201cVM5 | Set-VMNetworkAdapter -AllowTeaming On
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination.
u2711 If set to Source, a copy of every network packet it sends or receives is forwarded
to a virtual network adapter configured to receive the packets.
u2711 If set to Destination, it receives copied packets from the source virtual network
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
New Questions 7
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.
You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored.
New Questions 8
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1. You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.
What should you configure?
A. The Security settings of GP1
B. The Block Inheritance option for AllComputers
C. The Security settings of AllComputers
D. The WMI filter for GP1
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not
applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied. WMI filters, like GPOs, are stored on a per-domain basis. A WMI filter and the GPO it is linked to must be in the same domain.
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10:
Implementing Group Policy, p.470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC
New Questions 9
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has following storage spaces:
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk. Which storage space contains the new disk?
All storage that meets acceptable criteria for Storage Spaces will be placed in the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
New Questions 10
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.
You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS).
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.
Which virtual machine setting should you configure for VM2?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is
booting from the network is first.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3:
Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
New Questions 11
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the security template snap-in. You need to apply Template1 to Server2.
Which tool should you use?
A. Security Templates
B. Computer Management
C. Security Configuration and Analysis
D. System Configuration
A security policy is a combination of security settings that affect the security on a computer. You can use your local security policy to edit account policies and local policies on your local computer.
:A. Template was already created u2013 Provide standard security option to use in security policies
:B. Needs to be applied at the GP level
:C. Security templates are inactive until imported into a Group Policy object or the SecurityConfiguration and Analysis
:D. Tool to ID windows problems
New Questions 12
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.
You need to modify the snapshot file location of VM1. What should you do?
A. Right-click VM1, and then click Export.
B. Shut down VM1, and then modify the settings of VM1.
C. Delete the existing snapshots, and then modify the settings of VM1.
D. Pause VM1, and then modify the settings of VM1.
New Questions 13
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.
On Server1, you add Server2 to Server Manager.
When you attempt to connect to Server2 from Server Manager, you receive the following error message: "Credentials not valid."
You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1.
What should you do?
A. On Server 2, run the Configure-SmRemoting cmdlet.
B. On Server 1, run the Set-NetFirewallRule cmdlet.
C. On Server 1, run the Set-Item cmdlet.
D. On Server 2, install the Remote Server Administration Tools (RSAT).
Since they are both workgroup members, server 2 will have to be added to server 1 as a trusted host
New Questions 14
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.)
A. Run the systempropertiesremote. execommand.
B. Run the Fnable-PsRemoting cmdlet.
C. Run the Enable-PsSessionConfigurationcmdlet.
D. Run the Confiqure-SMRemoting.ps1script.
E. Run the Set-ExecutionPolicycmdlet.
The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To configure Server Manager remote management by using Windows PowerShell
On the computer that you want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as administrator.
In the Windows PowerShell session, type the following, and then press Enter. Set-ExecutionPolicy -ExecutionPolicyRemoteSigned
Type the following, and then press Enter to enable all required firewall rule exceptions. Configure-SMRemoting.ps1 -force u2013enable.
New Questions 15
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.
You need to create an IPv6 reservation for Server2.
Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)
A. the hardware ID
B. the DHCPv6 unique identifier
C. the DHCPv6 identity association ID
D. the SMSBIOS GUID
E. the MAC address
The Add-DhcpServerv6Reservation cmdlet reserves a specified IPv6 address for the client identified by the specified Dynamic Host Configuration Protocol (DHCP) v6 unique identifier (ID) (DUID) and identity association ID (IAID).
see more free 70-410 exam dumps
100% Renovate Microsoft 70-410 Questions & Answers shared by Certleader, Get HERE: https://www.certleader.com/70-410-dumps.html (New 496 Q&As)