Want to Pass 70-412 Exam In Next HOURS? Get it now →
April 20, 2017

How Does Ucertify Microsoft 70-412 training Work?

Q51. Your network contains an Active Directory domain named contoso.com. The domain 

contains two member servers named Server1 and Server2. 

You install the DHCP Server server role on Server1 and Server2. You install the IP 

Address Management (IPAM) Server feature on Server1. 

You notice that you cannot discover Server1 or Server2 in IPAM. 

You need to ensure that you can use IPAM to discover the DHCP infrastructure. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. On Server2, create an IPv4 scope. 

B. On Server1, run the Add-IpamServerInventory cmdlet. 

C. On Server2, run the Add-DhcpServerInDc cmdlet 

D. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet. 

E. On Server1, uninstall the DHCP Server server role. 

Answer: B,C 

Explanation: 

B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory. 

C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD). A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network. 

Reference: Add-IpamServerInventory; Add-DhcpServerInDC 


Q52. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2. 

You need to configure the replication between the sites to occur by using change notification. 

Which attribute should you modify? 

Answer: 


Q53. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Federation Services server role installed. 

You need to make configuration changes to the Windows Token-based Agent role service. 

Which tool should you use? 

To answer, select the appropriate tool in the answer area. 

Answer: 


Q54. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery. 

You create a new Active Directory group named Group1. 

You need to ensure that the members of Group1 can request a Key Recovery Agent certificate. 

The solution must minimize the permissions assigned to Group1. 

Which two permissions should you assign to Group1? (Each correct answer presents part of the solution. Choose two.) 

A. Read 

B. Auto enroll 

C. Write 

D. Enroll 

E. Full control 

Answer: A,D 

Explanation: 

See step 6 below. To configure the Key Recovery Agent certificate template Open the Certificate Templates snap-in. In the console tree, right-click the Key Recovery Agent certificate template. Click Duplicate Template. In Template, type a new template display name, and then modify any other optional properties as needed. On the Security tab, click Add, type the name of the users you want to issue the key recovery agent certificates to, and then click OK. Under Group or user names, select the user names that you just added. Under Permissions, select the Read and Enroll check boxes, and then click OK. 

Reference: Identify a Key Recovery Agent 


Q55. Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2. 

The domain contains four servers. The servers are configured as shown in the following table. 

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. 

On which server should you install IPAM? 

A. DC1 

B. DC2 

C. DC3 

D. Server1 

Answer:

Explanation: 

Explanaton: IPAM cannot be installed on Domain Controllers. All servers, except Server1, have the DC role 

Reference: IP Address Management (IPAM) Overview http://technet.microsoft.com/en-us/library/hh831353.aspx 


Q56. You have a server named Server1 that runs Windows Server 2012 R2. 

Each day, Server1 is backed up fully to an external disk. 

On Server1, the disk that contains the operating system fails. 

You replace the failed disk. 

You need to perform a bare-metal recovery of Server1 by using the Windows Recovery 

Environment (Windows RE). 

What should you do? 

A. Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter. 

B. Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter. 

C. Run the wbadmin.exe start recovery command and specify the -recoverytarget parameter. 

D. Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter. 

Answer:

Explanation: 

Performs a system recovery (bare metal recovery). This subcommand can be run only from the Windows Recovery Environment. 

* -backupTarget Specifies the storage location that contains the backup or backups that you want to recover. This parameter is useful when the storage location is different from where backups of this computer are usually stored. 

Reference: Wbadmin start sysrecovery 

http://technet.microsoft.com/en-us/library/cc742118.aspx 


Q57. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. 

DHCP is configured as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients. The solution must minimize administrative effort. 

What should you do? 

A. Create a superscope and scope-level policies. 

B. Configure the Scope Options. 

C. Create a superscope and a filter. 

D. Configure the Server Options. 

Answer:

Explanation: 

Any DHCP scope options can be configured for assignment to DHCP clients, such as DNS 

server. 

Reference: Configuring a DHCP Scope. 

http://technet.microsoft.com/en-us/library/dd759218.aspx 


Q58. DRAG DROP 

You have a server that runs Windows Server 2012 R2. 

You create a new work folder named Share1. 

You need to configure Share1 to meet the following requirements: 

Ensure that all synchronized copies of Share1 are encrypted. 

Ensure that clients synchronize to Share1 every 30 minutes. 

Ensure that Share1 inherits the NTFS permissions of the parent folder. 

Which cmdlet should you use to achieve each requirement? 

To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 


Q59. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table. 

You have a trust from contoso.com to another forest named fabrikam.com. 

You plan to migrate users from contoso.com to fabrikam.com. 

You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in contoso.com. The solution must not require administrators to modify permissions to shared resources. 

What should you use? 

A. Set-ADSite 

B. Set-ADReplicationSite 

C. Set-ADDomain 

D. Set-ADReplicationSiteLink 

E. Set-ADGroup 

F. Set-ADForest 

G. Netdom 

Answer:

Explanation: The Netdom move command moves a workstation or member server to a new domain. The act of moving a computer to a new domain creates an account for the computer on the domain, if it does not already exist. 

Reference: Technet, Netdom move 

https://technet.microsoft.com/en-us/library/cc788127.aspx 


Q60. DRAG DROP 

You plan to deploy a failover cluster that will contain two nodes that run Windows Server 

2012 R2. 

You need to configure a witness disk for the failover cluster. 

How should you configure the witness disk? 

To answer, drag the appropriate configurations to the correct location or locations. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 



see more free 70-412 exam dumps